fedyr

cover

IMG_2414.jpeg

IMG_2415.jpeg

IMG_2416.jpeg

IMG_2419.jpeg

Screenshot 2024-07-07 153713.png

plate_1.png

2024-07-07_c26799ab00e.jpeg

0.2mm layer, 3 walls, 15% infill

VaderAG

960966d9-4c60-4640-be36-26a6e4c11175.jpg

Fantastic design, but after printing original I found that it prevented the rollers in my Sovol from turning fully freely. Fine if you&#39;re not printing from the box but I wanted the free movement. Only change here is that each box is resized to be 90% of the width of the original which allows the free movement

90% Width for free rolling - 0.2mm layer, 3 walls, 15% infil

Thinner

daskier

dry+box+sovol+sh01+remix.png

I absolutely loved the original design but like others had issues with how tight it was, how difficult the lids were and rollers didn&#39;t freely roll. I had already commented what I did to resolve this and it is indeed trivial but this may help someone who just wants to use something already created. * containers are slightly smaller so it&#39;s easier to get in/out of the sovol. * rollers now freely roll * lids are less tight but still secure. (changing dessciant was too painful prior). Note: I have the 2024 model which has extra filament ports (4 instead of 2) and that&#39;s the only one I could test with.  I do not know if this works well on the previous model.

0.2mm/3 walls/15% infill-roll freely, looser lids

Small drying boxes for the Sovol SH01 dryer. Have fun

Sovol SH01 Silica Dry Box Container

Luke96

Snímek obrazovky 2025-11-26 151527.png

PXL_20251126_212735398.jpg

Sovol SH01 Silica Dry Box Container Remix

Sovol SH01 Silica Dry Box Container Remixed

ASIA

Print Profile(3)

Description

Comment & Rating (150)

License

Remixes (2)

Related Models