Nimbus 2000 a.k.a. Harry Potter's Broomstick

Want to support me or sell my designs?

If you want to support me or sell my designs check out my patreon

https://www.patreon.com/3DMakeryDE

My models will stay free for personal use!

Is this model too small for you? Check out this life size NIMBUS 2000

https://makerworld.com/en/models/2526894-life-size-nimbus-2000-with-working-stand#profileId-2780521

Original Post

There was no model of this special broomstick here on makerworld.

So I created one :)

Models

This model comes with 3 kinds of stands:

• Attachable stand straight
• Attachable stand crooked, 20° angle (see cover photo)
• Classic Stand to place it safely

Choose all, any or none of these stands

Print profiles

Fast print time: 0.4mm nozzle

• the model is scaled to 150% to make the nimbus logo printable at all
• model length about 550mm
  • If you want to scale it down, I strongly recommend to use a 0.2mm nozzle
• space between stick and back part is about 0,2mm

Best result: 0.2mm nozzle

• 100% model size
• model length about 360mm
• space between stick and back part is about 0,15mm

Assembly

• Print the back part and the stick
• optional: Print any or all stands
• Push (and glue) the stick into the back part
  • I did not need any glue
  • The stick fits on exactly tow positions into the hole of the back part
  • Seems should be on the bottom side of the assembled broom stick
• Attach a stand or place the broom stick on the classic stand

Used Filaments

• For 0.4mm nozzle
  • Back part: Eryone Dark Wood (do not use this with a 0.2mm nozzle)
  • Stick: Eryone metallic copper
  • Golden part: Eryone Ultra Silk gold (not great with a 0.2mm nozzle)
  • Stand: Extrudr NX2 black