Pontiac Firebird Trans Am - 1977 - Hueforge
Print Profile(2)
Description
This is 4 color Hueforge of Pontiac Firebird Trans Am from 1977.
I uploaded two sizes 200x147 X1/P1/A1 and size 180x132 for A1 Mini.
Do not adjust the thickness (Z) in your slicer!! The layers will not come out right. You can adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness.
Boost Me (for free)
I print all of my creations myself.
If you like my work, pls send me a boost, it will help me make more.
Thank you.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x146.5mm in size
You may print at higher layer heights below the Min Depth of 0.4mm
The Max Depth is 2.6mm and the Actual Depth is 2.6mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA - SILK Devil Design Light Gold Transmission Distance: 2.5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Blue Gray
At layer #12 (1.04mm) swap to Jade White
At layer #21 (1.76mm) swap to Black
At layer #24 (2mm) swap to Light Gold
At layer #28 (2.32mm) swap to Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)