License plate mount for BC OK EV sticker
Print Profile(1)
Description
There are various similar models of this decal holder but I have designed mine from scratch. Corners are rounded and license plate bolt is elongated giving a +/- 2.5mm of horizontal adjustment. I recommend using a smooth build plate and to put the decal on the build plate side (smooth) of the mount for maximum adherence. If you are searching for a model like this you are likely not wanting to put the decal on the paint surface of your car.
Installation is easy. Remove either right side bolts or left side depending on the side you want the mount to sit. Most people use the right side. Put decal onto the smooth side of the mount and slide the mount behind your license plate and line up the holes. Insert your bolts through license plate and the mount and loosely tighten both screws. Now you can slide the mount left or right to get the best alignment and then tighten the bolts down.
Boost Me (for free)
Boosts and likes are appreciated. Happy printing.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)