Deathly Hallows Shelf Brackets

We love Harry Potter in our house, so I made a shelf just for some of our Harry Potter stuff. I designed these shelf brackets for that shelf. They print super easy and go together well. Still be gentle when putting them together and on the wall.

First you need to find your spacing for studs in the wall or as I did, I used toggle bolts to mount the Wall Mounts (1/8 in. x 3 in. Zinc-Plated Steel Mushroom-Head Phillips Toggle Bolts with Screws (25-Pack). Everbilt 1/8 in. x 3 in. Zinc-Plated Steel Mushroom-Head Phillips Toggle Bolts with Screws (25-Pack) 803902 - The Home Depot

Then once you find the spacing for the Wall Mounts you will then need to attach the Shelf Mounts to the shelf. I used #6 x 3/4 in. Stainless Steel Phillips Flat Head Sheet Metal Screw (7-Pack) Everbilt #6 x 3/4 in. Stainless Steel Phillips Flat Head Sheet Metal Screw (7-Pack) 827191 - The Home Depot

After mounting the Shelf Mounts to the shelf its time to attached the bracket itself to the Wall Mount. Just slide the Shelf Bracket on the Wall Mount and then slide the shelf with the two Shelf Mounts attached onto the bracket on the wall. It should all slide together nicely as long as you got the measurements correct.

Once the shelf is slide in place on the wall now you need 4- M4x6mm screws to lock both brackets to the shelf bracket. Now its time to decorate!!

List of Non-Printed parts-

4 - 1/8 in. x 3 in. Zinc-Plated Steel Mushroom-Head Phillips Toggle Bolts with Screws

Everbilt 1/8 in. x 3 in. Zinc-Plated Steel Mushroom-Head Phillips Toggle Bolts with Screws (25-Pack) 803902 - The Home Depot

4 - Chamfered #6 x 3/4 in. Stainless Steel Phillips Flat Head Sheet Metal Screw

Everbilt #6 x 3/4 in. Stainless Steel Phillips Flat Head Sheet Metal Screw (7-Pack) 827191 - The Home Depot

4 - M4x6mm