Skid Plate Front/Rear for Arrma Granite Grom 1:18

I designed these Skidplates for easy printing and preventing the Model from Scratches.

Print lying on the Side for better Layer Alignement.

I printed and tested them with eSUN PLA+ with 2 Layers and 15% Gyroid Infill. It works on a good adheason textured PEI Plate on my P1s without brim and Supports ( the holes are a little rough ). If you have adheasion problems please add a brim and if you prefere perfectly round holes please use Tree Supports. I have printed one set with and one without Tree Supports and both fulfill their Purpose.

Add more layers for a little bit more strength but consider that these parts are meant to be scratched and destroyed sometime.

My Profile is based on theoretical more strength with 3 Walls, 25% infill etc. , everything printed with de original 0,4mm nozzle.

Ask if you have problems or if i should modify them. 

The front and rear Skidplate have different sizes, the longer one is for the rear and the slightly shorter one for the Front.