Kratos MerGeneration - Hueforge

This is the first artwork of a series, I plan to print them and put them on my wall. With this photo I wanted to show both sides of Kratos (The God of War and the Father that now he is). The Red color is for linking it to the other artworks (I plan to do Batman, SpiderMan, Ezio Auditore and more).

I have shared two versions, a darker one (as in the pic) and a lighter one.

The Model is 200x176.48mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.6mm and the Actual Depth is 1.6mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
PLA BambuLab Basic Red Transmission Distance: 4
This print uses 4 unique filaments

Swap Instructions:

DARKER ONE
Start with Black
At layer #10 (0.52mm) swap to Gray
At layer #18 (0.84mm) swap to Ivory White
At layer #23 (1.04mm) swap to Red
At layer #35 (1.52mm) swap to Ivory White for the rest.

LIGHTER ONE
Start with Black
At layer #10 (0.52mm) swap to Gray
At layer #16 (0.76mm) swap to Ivory White
At layer #23 (1.04mm) swap to Red
At layer #35 (1.52mm) swap to Ivory White for the rest.

I hope you like it!
Don't Forget to share your prints <3