Bambu Lab Swatch Snap Latch Box - Free 3D Print Model

Search models, users, collections, and posts

Embrace Making

3D Printer>3D Printer Accessories

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 20% infill

Designer

9.5 h

5 plates

4.6(89)

Open in Bambu Studio

Boost

354

724

133

970

431

Released

Description

As seen in the video above - storage case for the Bambu Lab filament swatch kit.

Nicely organize, store, display, and protect your filament swatches in this snap latch box with custom inserts and picking tool. Houses all 80 swatches that can easily be picked from the inserts - the inserts are removeable - and the inside face of the lid can seat 8 swatches to visualize a color palette for your next great print!

Split pin sizes are 1/8" x 1-3/4" and 1/8" x 3/4"

► https://amzn.to/3LJS1DV

► https://amzn.to/3N1FbCq

As an Amazon associate I may earn a small commission (at no extra cost to you).

Boost Me (for free)

I would be so grateful if you would consider boosting my model - it encourages me to continue providing models on Maker World and it goes a long way to support me and my work. Thank you!

Comment & Rating (133)

@Fallenhydraa

Print Profile

0.2mm layer, 3 walls, 20% infill

My first big project and it came out great! I did have problems with scraping on the inserts and once on the bottom of the box, which some people had described. I canceled printing twice, worrying I was going to damage my new A1 mini. After inspecting the prints and the machine, I could not see any damage so I powered through listening and watching carefully. I also want to note that I turned off “Reduce infill retraction”, but still had some scraping. Despite the scraping the prints did finish.

@Fallenhydraa

After my prints, I did some research and found that you can adjust your extruders Z-hop retract settings to 0.6mm and this may help the scraping issue. I also read that the A1 mini has four screws behind the nozzle and heat assembly that could be lose and need some tightening. Here is the articles for both of these on Bambu’s wiki: https://forum.bambulab.com/t/print-is-destroyed-by-the-print-head/79815/8 https://wiki.bambulab.com/en/a1-mini/troubleshooting/print-issues-troubleshooting I also want to mention that I found another file on makerworld with different m3 screw sizes and modifyed them to match the split pin sizes mentioned above. It worked like a charm :) I will upload my own studio file for this! https://makerworld.com/en/models/947263?from=search#profileId-914283

(Edited)

@lukas98

Print Profile

0.2mm layer, 3 walls, 20% infill

The trays could not be printed with this profile for me. had to slice it with the cooling fan on 100% and tried changing layer height and temperature. then it worked

@Djnemesis23

Print Profile

0.2mm layer, 3 walls, 20% infill

great print results just waiting for the hardware to put this together now I can finally get rid of that string

The profile uploader has replied

@embracemaking

Nice work, I like the green!

@mariovermeulen

Boosted

Print Profile

0.2mm layer, 3 walls, 20% infill

Perfect print

@Michael70

Print Profile

0.2mm layer, 3 walls, 20% infill

was absolutely perfect. Everything printed great. swatches fit just like stated. will probably print a second one due to Bambu sending me 3 boxes of them.