Retroperspektive42

cover

20240630_125829.jpg

20240630_125744.jpg

20240630_125820.jpg

20240630_125816.jpg

20240630_125810.jpg

plate_1.png

2024-07-03_488a923daebbc.jpg

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 230x230mm in size You may print at higher layer heights below the Min Depth of 0.88mm The Max Depth is 2.6mm and the Actual Depth is 2.7mmFilaments Used: &nbsp;&nbsp;&nbsp;&nbsp;PLA Black Transmission Distance: 0.3 &nbsp;&nbsp;&nbsp;&nbsp;PLA BambuLab Basic Blue Gray Transmission Distance: 3 &nbsp;&nbsp;&nbsp;&nbsp;PLA BambuLab Basic Gray Transmission Distance: 2 &nbsp;&nbsp;&nbsp;&nbsp;PLA BambuLab Basic Jade White Transmission Distance: 5 &nbsp;&nbsp;&nbsp;&nbsp;PLA BambuLab Basic Blue Transmission Distance: 4 &nbsp;&nbsp;&nbsp;&nbsp;PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 This print uses 6 unique filaments&nbsp;Swap Instructions: &nbsp;&nbsp;&nbsp;&nbsp;Start with Black &nbsp;&nbsp;&nbsp;&nbsp;At layer #13 (1.12mm) swap to Blue Gray &nbsp;&nbsp;&nbsp;&nbsp;At layer #16 (1.36mm) swap to Gray &nbsp;&nbsp;&nbsp;&nbsp;At layer #17 (1.44mm) swap to Jade White &nbsp;&nbsp;&nbsp;&nbsp;At layer #22 (1.84mm) swap to Blue &nbsp;&nbsp;&nbsp;&nbsp;At layer #27 (2.24mm) swap to Ice Blue for the rest.

0.08mm layer, 2 walls, 100% infill

I created the front Cover of Suikoden 2 in HueForge for a friend of me. The scale is 230x230. Please Enjoy!

HueForge Suikoden 2

ASIA

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models