======== English Description ========
Hello community! I created a wall switch with an ESP32-CAM camera, I added 2 momentary buttons to control home automation devices, in my case leds under my kitchen counter. I did the programming in ESPHOME and I then integrated into my home automation system which is Home-Assistant. For the moment it is a prototype I will update it when I have time.

======== French Description ========

Bonjour la communauté ! J'ai créer une switch mural avec une caméra ESP32-CAM, j'ai ajouté 2 boutons momentanés pour contrôler des appareils domotique, dans mon cas des leds sous mon comptoir de cuisine. J'ai fait la programmation dans ESPHOME et j'ai ensuite intégré dans mon système de domotique qui est Home-Assistant. Pour le moment c'est un prototype je vais le mettre a jours quand j'aurai du temps.

======== Parts List ========

Buttons

Sensor

ESP32-CAM

Cam Extention

PM-01

======== ESPHOME ========

esphome:  name: switch_cam_cuisine_2btn  platform: ESP32  board: esp-wrover-kitwifi:  ssid: "IzouCube - Wifi"  password: "yourwifipassword"  ap:    ssid: "Switch Cam Cuisine 2Btn"    password: "yourwifipassword"captive_portal:logger:api:ota:esp32_camera:  external_clock:    pin: GPIO0    frequency: 20MHz  i2c_pins:    sda: GPIO26    scl: GPIO27  data_pins: [GPIO5, GPIO18, GPIO19, GPIO21, GPIO36, GPIO39, GPIO34, GPIO35]  vsync_pin: GPIO25  href_pin: GPIO23  pixel_clock_pin: GPIO22  power_down_pin: GPIO32  name: Camera Cuisine  horizontal_mirror: falsebinary_sensor:# Bouton 01  - platform: gpio    pin:      number: GPIO12      mode: INPUT_PULLUP      inverted: true    name: "Cuisine_BTN_01"# Bouton 02  - platform: gpio    pin:      number: GPIO13      mode: INPUT_PULLUP      inverted: true    name: "Cuisine_BTN_02"sensor:# Senseur de Temperature et Humidity  - platform: dht    pin: GPIO2    model: DHT11    temperature:      name: "Cuisine Temperature"    humidity:      name: "Cuisine Humidity"    update_interval: 60sswitch:  - platform: gpio    pin: 14    name: "Led_BTN_01"  - platform: gpio    pin: 15    name: "Led_BTN_02"esphome:  name: switch_cam_cuisine_2btn  platform: ESP32  board: esp-wrover-kitwifi:  ssid: "IzouCube - Wifi"  password: "5144581386a"  ap:    ssid: "Switch Cam Cuisine 2Btn"    password: "5144581386a"captive_portal:logger:api:ota:esp32_camera:  external_clock:    pin: GPIO0    frequency: 20MHz  i2c_pins:    sda: GPIO26    scl: GPIO27  data_pins: [GPIO5, GPIO18, GPIO19, GPIO21, GPIO36, GPIO39, GPIO34, GPIO35]  vsync_pin: GPIO25  href_pin: GPIO23  pixel_clock_pin: GPIO22  power_down_pin: GPIO32  name: Camera Cuisine  horizontal_mirror: falsebinary_sensor:# Bouton 01  - platform: gpio    pin:      number: GPIO12      mode: INPUT_PULLUP      inverted: true    name: "Cuisine_BTN_01"# Bouton 02  - platform: gpio    pin:      number: GPIO13      mode: INPUT_PULLUP      inverted: true    name: "Cuisine_BTN_02"sensor:# Senseur de Temperature et Humidity  - platform: dht    pin: GPIO2    model: DHT11    temperature:      name: "Cuisine Temperature"    humidity:      name: "Cuisine Humidity"    update_interval: 60sswitch:  - platform: gpio    pin: 14    name: "Led_BTN_01"  - platform: gpio    pin: 15    name: "Led_BTN_02"