Minion Shoe Charms

Minions for your shoes. I didn't do detailed models of the eyes or anything for the mouth/hair because of all the variations you could do. For the eyes, I just drew the pupil with a sharpie, for the mouth, well, I'm assuming they're hiding in the shoe, but still wanted to add the blue of the overalls. So feel free to draw on a mouth too if you'd like. Just be cognizant of potential ink bleed in the layer lines.

The profile has 7 plates, 5 for individual colors, 1 single color model plate, and 1 painted solid model plate. What if you've only got 1 AMS? No problem; after the blue is done printing, manually swap it to another color filament, just be sure to tweak that in the slicer. The multicolor produces a lot of purge waste, so try the single color or gluing the pieces together before going for a plate full of nice multicolord minions. The individual parts to have a bit of clearance to each other to actually fit nicely together.

My parts in the pics were all printed with a 0.4mm nozzle, but a 0.2 may get you some finer lines along the round parts.