shadow1102

cover

Build Surface

plate_1.png

Bottom. 7 3x10mm magnets on back

plate_2.png

Bottom 28 3x10mm magnets all sides

plate_3.png

Build Surface with work space

plate_4.png

Keltbear

Plates2.png

Update, I simplified the file increasing slicing speed. Added a workspace to set down smaller parts on. This plate will be a tighter fit. I moved the lift tabs to the sides instead of the middle.It is also dual color, you can repaint the color if you don&#39;t want the color switch.If you are printing in PLA it would be good to clean the build plate and possibly increase your bed temp to 60 to increase adhesion.&nbsp;.20mm Standard, This will take a while to slice. Simplified the main build surface STL.

0.2mm layer, 3 walls, 15% infill 

Saw a builder using a surface with a cutting mat and another surface with holes for nubs to fall into. Didn&#39;t want to purchase it so I designed my own. The holes are 6 mm wide so nubs should fall in easily. I did notice some parts can fall in if they are tiny enough. I added magnet holes to put 10x3mm magnets around the base to add attachments later like manual holder and side cutter holder.

Gunpla Build Surface

ASIA

Print Profile(1)

Description

Comment & Rating (12)

License

Related Models