Flexi Liopleurodon (Print-in-place)

Extra service "Liopleurodon Mark-Ⅱ" released!!

https://cults3d.com/en/3d-model/art/flexi-liopleurodon-mark-set-print-in-place

https://flexseedsshop.etsy.com/jp/listing/1741619932/flexi-liopleurodon-mark-2-set-stl-file 

If purchased, commercial use license and 3mf files are available.

---------------------------------------------------------------------------

[Update] 
---2024/08/14---
Added a profile consisting of one color.

---2024/09/19---
Due to a change in the Terms of Use, single color profile has been removed. If you wish to create single color profile, please set all color settings to a single slot before 3D printing.

 ---2025/10/25--- 
・Changed the support for the head model to brim type.
 

---------------------------------------------------------------------------

This is Flexi Liopleurodon. The body, which is made in reference to spherical joints, has a very wide range of motion and is flexible enough to draw a semicircle with the body. There are two models to choose from: one with a mouth that opens and closes, and one without a mouth that opens and closes. The open/close model can be assembled simply by inserting the head part into the body. The non-opening type is completed simply by 3D printing. (Print in Place)

Print in Place with no supports. Please let us know which type you like better in the comments below!! Also, I would be very happy if you could share photos of your 3D printed products.

Print Settings

Printer Brand: Bambu Lab

Printer: A1 Mini

Rafts: No

Supports: No

Resolution: 0.2mm

Infill: 15-20%

Filament: MIKA3D PLA Rainbow silk 
 

Notes:

{Recommend}
Layer Height: 0.2mm
Print Speed: 60mm/s
Outer Wall Speed: 10mm/s
Z Seam Alignment: User Specified
Z Seam Position: Right (Body), Left (Head)
Z Seam Corner Preference: Hide Seam

{Recommend: Bambu Lab Printer}
Layer Height: 0.2mm
Seam Position: Aligned
Wall Loops: 3
First layer: 30mm/s
Outer wall: 30mm/s
Prime Tower Width: 10mm
Prime Volume: 10mm^3
Prime Tower Brim Width: 0mm

Assembly

The model is completed by simply 3D printing two bodies and attaching them together. For the type with open/close mouth, apply adhesive to the head parts and insert them into the body from the front to assemble. Please refer to GIF when assembling the 3d printed.

💰Commercial Use💰

This model is not available for commercial use under "CC BY-NC-ND 4.0" below. Therefore, I am selling the upgraded model with additional detailing and a license for commercial use. If you want to sell my model commercially, please check my Cults, Etsy, and MyMiniFactory.

https://cults3d.com/en/design-collections/3dflexseeds/commercial-use-ver 
https://flexseedsshop.etsy.com 
https://www.myminifactory.com/users/3dflexseeds/collection/commercial-ver 

On Patreon, you can purchase public commercial models at a special discount, and new releases are available for free present🎁
In addition, you can get monthly exclusive models and generous welcome pack!!
https://www.patreon.com/FlexSeeds 

⚠Warning⚠

Be careful in environments with young children and pets!
This model contains small parts. If not properly stored in an environment with young children or pets, it may lead to accidents such as accidental ingestion or injury. If infants or pets are present, please take appropriate measures depending on the situation, such as refraining from 3D printing or storing in an appropriate place.

Do not apply strong force!
Applying strong force to a 3D printed model or throwing it may damage the model and lead to accidents such as injuries. In addition, debris from damage to the model may be accidentally ingested by infants or pets. If the model is damaged, dispose of it immediately.

Store them in an appropriate place.
After 3D printing, store the model in an appropriate place out of reach of young children and pets. Proper adherence to the precautions will ensure safe use of the model.