Hub Mi Vacuum Cleaner G9
Print Profile(2)
Description
Joint for repairing Xiaomi Vacuum Cleaner G9/G10 electric vacuum cleaner, the upper supports break and they do not resell the spare part. Above, if you want to strengthen it, you can thread the part with the 5mm hole with a cut M6 (demonstration photo where it says “5mm Diameter”) and insert an M6 TPSEI
WHAT'S NEEDED?:
THE PICK IS USED TO AVOID THIS (DEMONSTRATION PHOTO BELOW)
REMOVE THE TWO ORIGINAL CAPS, CUT THE WIRES AND PASS THEM OVER THE PRINTED PARTS THEN INSERT THE ABOVE MENTIONED CAPS (IN THE NECESSARY MATERIAL)
MAKE 2 X 2MM HOLES ON THE UPPER PART (PHOTO BELOW AS DEMONSTRATION)
REINFORCE HOLES WITH GLUE (SINCE WE HAVE IT DISASSEMBLED AND AT HAND)
ALL SCREWS ARE THE SAME EXCEPT THESE (PHOTO BELOW)
NOT NECESSARY/NOT NECESSARY
2 M6 SCREWS AS IN THE PHOTO BELOW/2 M6 screws like the photo below
Boost Me (for free)
by giving me boosts, you allow me to continue creating free objects, thank you for your support
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (29)