Ace of Spades Playing Card (True-to-Size)
Print Profile(1)
Description
Description
This a true-to-size ace of spades playing card. My Ender 3 Pro does not have to capability to print dual colors, so I had to experiment with stopping the print and changing the filament. I did this by adding a g-code script in Cura, (a lot easier than I thought it would be), to stop the print after the white body of the card then changed to black PLA and resumed the print. I also tried printing the white body, ending the print, changing the filament, and then changing the home offset on my printer to start the next print at the desired height (+1.5mm). This also worked well. Fun print for my first time experimenting with multi-colored prints!
As for all my prints, I am using an Ender 3 Pro with a 0.4mm nozzle and upgraded boden tubing, springs, and a Creality glass print bed. I used Cura 5.4 software and the following settings to slice this model.
Print Settings:
- Layer Height: 0.2mm
- Nozzle Temperature: 215°C
- Bed Temperature: 55°C
- Initial Layer Speed: 30 mm/s
- Print Speed: 50 mm/s
- Retraction: Enabled
- Print Bed Adhesion: Skirt
- Infill: 20%
Please reach out with questions and leave a comment down below if you try this out for yourself!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (13)