Weezy Breezy Geometric YinYang LED Pendant Lamp

This is actually one of my first designs using the shadow layered style. I call it, “Weezy Breezy".

I call it this because I originally designed this for a buddy of mine that goes by the name Weez. The original print was done with Glow in the Dark filament on a buggy E3V2 that i absolutely hated. This print came out much nicer. lol.

I made this lamp using translucent filament but it'll work with a light color like white or glow in the dark. Keep the walls at 3 for the best results. This print is a single piece with no supports and will take about 385g of filament. The print setting profile included in the .3mf project works well with most PLA and is tailored to this model. The lamp will fit most pendant fixtures with a 40mm retention ring style, but below are links to the hardware I used.

Please like and follow for more trippy psychedelic designs. Check out my profile for more lamps, planters, and all sorts of random stuff. I even have a catapult that can shoot a 16 gram puck over 100 feet. I'm sure you'll find something you like. Thank you for checking out this lamp.

Supplies needed:

The Bulb: https://a.co/d/06gxW99g

-This is a 4 pack from Amazon. I think they work great but any sub 10 watt LED bulb like this will do. Low wattage is critical to avoid overheating and long term deformation. If you use a low wattage LED bulb this design will last through years of continuous use.

The Power Fixture: https://www.amazon.com/dp/B0813BXC6Q?ref=ppx_yo2ov_dt_b_product_details&th=1

- This has been my favorite hemp cord to use. Its a decent length, comes with hanging hardware, and has a convenient screw on retention ring. Simply slip the lampshade over the threaded body and fasten it with the ring. Super simple assembly. Again, this design is compatible with any hanging fixture that utilizes a standard 40mm threaded body and ring system, so feel free to mount it as you desire.