Replacement Crocs Strap - Free 3D Print Model

Search models, users, collections, and posts

Evile Designs

Fashion>Clothes

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

31 min

1 plate

4.8(12)

Open in Bambu Studio

Boost

129

215

139

Released

Description

A replacement strap for Crocs, UK men's size 11/EU size 46, it will probably work for close sizes like 9-13.
I printed in TPU-95.

I suggest you face the print bed side towards the foot when fitting the strap to the shoe, so the smoothest surface is touching the foot to prevent blisters/chaffing. Also this allows the less densely printed top skin to stretch to accommodate the curvature of the strap.

It takes quite some force to push the strap button through the strap hole, I managed with just my fingers and a lot of force. You may want to use a tool like circlip or needle nosed pliers to assist with stretching the strap hole when attaching the strap if your fingers are not strong.

Warming up the end of the strap in a cup of freshly boiled water for 2 minutes makes putting the strap on much easier.

Comment & Rating (18)

@user_2178288565

Print Profile

0.2mm layer, 2 walls, 15% infill

worked well, definitely use very hot water to get it on.

The profile uploader has replied

@user_3082380071

Yeah, need to resoften it for sure, but it saved my most comfortable pair of Crocs in a style they no longer make.

(Edited)

@user_1120738451

Print Profile

0.2mm layer, 2 walls, 15% infill

Fixed my crocs! puppy chewed them. I do recommend boiling the ends that needs to go over the caps. 45-60 seconds made them pop over nice and easy. size 11 croc - sunlu 95 tpu - printed x2 - consistent. I work in a restaurant and don’t even notice the difference though the tpu is much stiffer than the original material. Solid print, many thanks!