BambuLab P1S P1P Micro SD Card Dust Cover / Plug - Free 3D Print Model

Search models, users, collections, and posts

br1acc

3D Printer>3D Printer Accessories

IP Report

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

PLA, 0.1mm layer, 2 walls, 15% infill

Designer

10 min

1 plate

4.6(662)

TPU, 0.1mm layer, 2 walls, 15% infill

Designer

10 min

1 plate

4.6(28)

Complete Set - TPU 0.2mm layer, 2 walls, 15% infill

37 min

1 plate

5.0(28)

Open in Bambu Studio

Boost

830

2804

740

4.3 k

2.2 k

Released

Description

There are print profiles included for PLA and TPU.

Please choose the correct one, because the geometries are slightly different.

Simple dust cover for the Micro SD card slot.

Designed to fit snugly when there is an SD card inserted in the printer.

Prints in a little under 10 minutes, using about 0.3 grams of filament.

Print settings are very important, so please use the included print profile w/ a 0.4mm nozzle.
If using TPU, make sure it is dry!
This needs to be printed slowly - most of the speeds have been tuned to 30 mm/s.
Optimized for 0.10mm layer height.

Installation:
Push into place into place with your fingers. The SD card should fit inside the notched out section.

Be gentle, you you might accidentally “eject” the SD card.

Due to variances in printing, it might not fit perfectly the first time.
You can try scaling by 0.3% - 0.5% in the slicer.

Comment & Rating (740)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.