rickey.carr

cover

20240629_203242.jpg

plate_1.png

2024-06-30_ed0c6e9f46d34.jpg

0.2mm layer, 4 walls, 25% infill

nosupportsneeded

zackza

photo_2024-08-03_14-24-20.jpg

photo_2024-08-03_14-24-14.jpg

photo_2024-08-03_14-24-09.jpg

photo_2024-08-03_14-24-03.jpg

2024-08-03_1c53a9cd574a3

rotated back to the original upside down orientation, and no supports needed!honestly looks better since theres no support breaks or sanding needed

0.08mm layer, 4 walls, 25% crosshatch infill, no supports

build-in-supports

photo_2025-03-20_18-39-37.jpg

built-in-support-glock-keychain.jpg

2024-08-05_2bfd6d54c9edc

photo_2025-03-20_18-39-32.jpg

0.08 layer height&nbsp;cross hatch 25% infill&nbsp;NO wasteful supports, all self supporting with extra tins fins in most overhangs!&nbsp;I made sure this can be printed with zero supports needed, everything should print with all the bridge areas mostly supported by an extra fin (primitive rectangles) i added. I also wanted it to use the least amount of filament and yet be the highest qualitya nd I found anythingless than 10grams is diminishing returns for this model size!&nbsp;I added small 90% style pegs under all the over hang problem areas or most, I could have added a few at the very top (Bottom of the magazine gap) like ive seen others do but my a1 mini seems to do that part no problem. It is always the little overhangs on the sides, mag release buttons etc so I added little pieces like built in support fins,, including a fin added the biggest problem area, the trigger guard lol so I just gave it an upside down two stage trigger , most non gun fans wont know :D Tell them its a new inverted two stage trigger for the streets that lets you shoot sideways. Maybe next Ill add ports for sideways iron sights too! &nbsp;edit: added extra built in support fins so the ejection port doesnt fray when printing, and some others, so it should print even more perfect without supports now. EDIT: added more half cube builtin support angles camfors etc

built-in-supports, 0.08mm, 2 walls, 25% crosshatch infill

165% scale 0.08mm layer height extra fine, tree supports

photo_2024-07-29_13-26-11.jpg

photo_2024-07-29_13-25-58.jpg

2024-07-29_6a9b018c6cdb4

extra fine 0.08mm layer height, tree supports, and scaled up to 165% and rotated.&nbsp;

165% scale, 0.08mm layer, 4 walls, 25% infill

photo_1_2025-08-14_07-51-42.jpg

photo_2_2025-08-14_07-51-42.jpg

I just snip the back ring off if porinted in silk, , I know I know, but no matter what i did to cut it off or remove it with conventional paitning it would add extra unwanted color changes so honestly, its worth it to me to still upload. You have to snip off the back ring like supports but hey, its 2 color and thats just because of silk. I dont wanna mess with it more but yeah&nbsp;works great with Grey too or whatever color. took a while to get it all just right to be just 1 color change

2 color, 0.08mm layer, 2 walls, 20% infill, 1 color change

3DPickles

Gun Glock keychain

A remix with smooth top for easier printing and a better keyring spot to make it stronger.

Gun Glock Keychain 2.0

SirJoshy24

crocko with a glocko

photo_1_2026-01-27_06-19-27.jpg

photo_2_2026-01-27_06-19-27.jpg

Magnet Glock Fidget

ASIA

Print Profile(5)

Description

Comment & Rating (531)

This remix is based on

License

Remixes (2)

Related Models