Search models, users, collections, and posts
Webley Nemesis X Stock
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
3.7 h
1 plate
Open in Bambu Studio
Boost
38
122
8
8
134
51
Released
Description
This is a replacement for the original stock on Webley Nemesis X PCP.
The stock consists of two parts the main stock and butt pad.
Both can be joined together using M4 threaded inserts and M4 socket screws.
You could potentially reduce the holes in the stock and use self-tapping screws however my design assumes use of the inserts.
The stock is secured onto the air bottle using the original bolt and nut.
The build is strong and light using 15% infill and two walls, but anything extra will add to the durability.
Parts required:
SHCS screw M4x25 - 2 PCS
Threaded Inserts M4x8.1x6.3 - 2PCS
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (8)