wavy planter

Search models, users, collections, and posts

h3li0

Household>Decor

IP Report

Print Profile(6)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

x1c · full size

Designer

5 h

2 plates

5.0(434)

a1mini · full size

Designer

5.3 h

2 plates

5.0(58)

a1mini · 85%

Designer

3.9 h

2 plates

5.0(31)

x1c · 85%

Designer

4 h

2 plates

5.0(30)

Click to see more

Open in Bambu Studio

Boost

2379

5898

751

551

6.7 k

3.7 k

Released

Description

with wrap-around plate

modern minimalist planter design with wavy pattern that sits elevated in a wrap-around plate

full dimensions in mm > x:110 · y:110 · z:100

included are the profiles at full size and 85% size, for both X1C and A1mini
the a1mini profile is equipped with the .60mm nozzle for the easywood PLA printing

this design has an updated approach to how the planter stays elevated agains the plate versus my previous planter with wrap around plate designs, hope you enjoy it!

photos show two different color scheme choices, that were kindly supported by FormFutura, that provided the filament shown on the pictures

notes

if you choose to use a contour fuzzy skin (as seen on the green plate in the photos) make sure that you use a cylinder modifier to prevent fuzzy on the elevated “tabs” of the plate
includes bambu studio 3mf files and STLs
all photos uploaded are of the actual printed model, and are copyright protected
if you enjoy this model please consider to buy me a coffee
commercial licence membership available on my patreon

Boost Me (for free)

if you enjoy the design, please consider giving it a boost :)

Comment & Rating (751)

@Zimmi

Boosted

Print Profile

x1c · full size

super high quality print on 0,08 layer thickness. extreemely precice and clean printed it on p1s at 8h:30min for the planter and 2h for the plate absolutely presentable on the table, and in my opinion one of the nicest, if not the nicest planter out there. thank u for sharing your design.

(Edited)

The profile uploader has replied

@h3li0

oh wow you printed at .08? curious to see how that came out, would you share a photo? :)

(Edited)

@Zimmi

Boosted

Replying to @h3li0 :

sure will post that picture in the evening, I had it running over night and just wanted to leave that quick rating. am currently busy preparing my daughter's 6th birthday. I'll post the picture in the evening

(Edited)

@h3li0

Replying to @Zimmi :

cool thanks, happy birthday for your kid - and the parents as well of course :)

(Edited)

@user_2030951649

Print Profile

a1mini · 85%

It turned out beautifully when modeled with dry material. Thank you

(Edited)

The profile uploader has replied

Show original

@h3li0

hey, that looks to me like it's the seam, which looks like that filament doesn't handle very well, so you can try drying the filament and doing calibration to get better results, and do some trials with scarf seam to get a less visible seam - although it will always be there, that's just a characteristic of FDM printing :)

@user_2030951649

Replying to @h3li0 :

Thank you for your reply So it's the filament then I'll dry it and try making it again

(Edited)

Show original

@h3li0

nice prints now :)

@Drk_Chpr

Boosted

Print Profile

x1c · full size

A truly beautiful model, remarkably easy to print

The profile uploader has replied

Show original

@h3li0

merci!

@harvester666999

Please tell me what material you used for the pot, and what color

Show original

@Drk_Chpr

Boosted

Replying to @harvester666999 :

this is bambulab red marble PLA filament the base is esun grey petg

Show original

@jualcald

Print Profile

x1c · full size

Awesome print! I happened to have a few layer errors mid-print using eSun Marble PLA, and I have no idea what could have happened or how to prevent it for next time. Printed it on a Bambu P1S (closed) Any idea what it could have been?

The profile uploader has replied

@h3li0

hey, that looks like a layer shift, so it can be a few things, the print lifted slightly if there was some residues on the bed that prevented proper adhesion, or it's a matter of doing a printer full calibration to get it back into place. (btw i would not recommend printing marble pla with the door closed, unless you live in an area of the world where it's winter time right now)

(Edited)

@jualcald

Replying to @h3li0 :

Thank you! I'll test your recommendations ;)

@jualcald

Replying to @h3li0 :

Sorry for the double post, but then I realized that 2 things: 1.- I can 100% get behind that a layer shift would occur due to poor layer adhesion in the bed, but isn't that normally seen in the beginning of the print, not the end? 2.- Interestingly you can see that the print "corrected itself", shifted outwards for around 5-6 layers then went back to the original placement... had it not corrected I would totally agree that "something happened", but since it did, I got more confused than before

@noragee

Print Profile

x1c · full size

Perfect print experience. So beautiful.

The profile uploader has replied

@h3li0

thanks!

@LuSilva

Great! I love that combination colors.

@missandmr3d

Boosted

The vase turned out perfectly, but I'm having some trouble with the seam on the plate, could you perhaps offer assistance? It's not overly significant, but the eye seems drawn to the imperfection 😂

The designer has replied

Show original

@h3li0

The seam will always be present, but with this filament it becomes very noticeable Attempts to calibrate the filament and use a scarf seam to improve it, alternatively fuzzy skin is always an excellent option to hide the seam

Show original

@missandmr3d

Boosted

Replying to @h3li0 :

I conducted a test print using fuzzy skin, and the result was excellent, except for the unfortunate seam issue. I printed with a standard color PLA filament

Show original

@user_2365965757

Boosted

Print Profile

a1mini · 85%

A minor flaw in the tray's seam, but nothing serious. Very pretty

The profile uploader has replied

Show original

@h3li0

thanks!

@samson87

Print Profile

x1c · full size

This print looks amazing. printed it in Bambu petg-cf for the main body, and PLA-CF for the outer portion (didn't have another petg-CF filament). thanks for sharing, I'll be printing it again for sure.

The profile uploader has replied

@h3li0

cool print

@samson87

Replying to @h3li0 :

Thanks!

@Wells.tyler

Boosted

Print Profile

x1c · full size

Very cool design! I printed with a dual color PLA and the color shift looks amazing!

The profile uploader has replied

@h3li0

cool looking filament!

@LUethyNAdja

Boosted

Print Profile

x1c · full size

I am very impressed!🥰

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.