Death Star Model Lamp
Print Profile(1)
Bill of Materials
Description
This Death Star is a remix of this model:
https://www.myminifactory.com/object/3d-print-death-star-82575
I modified it, as you can see in the pictures.
I have constructed a pole for the inner part, to which the LED strips can then be attached. There is also a compartment at the top for the battery and switch.
The LED strip is simply wrapped around the pole provided for it, the green laser consists of one LED of the LED strip.
The inner wall of the model must be printed very thin to make the holes. Otherwise, you have to re-drill every, yes EVERY, hole.
Simply glue the pole with the compartment to the top opening with hot glue.
At the end, you can just put both sides together, they should snap into each other.
See in the video: https://www.youtube.com/watch?v=-yRkI2bRuYE&t=207s
I posted this stl on thingiverse too.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (13)