Print Profile(1)
Description
A 2D bas-relief created using multiple colors of filament printed on different layers.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
The Model is 200x105mm in size
You may print at higher layer heights below the Min Depth of 0.52mm
The Max Depth is 2.8mm and the Actual Depth is 2.8mm
Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PETG Fillamentum Iced Green Transp Transmission Distance: 32
PETG PolyLite White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #14 (1.24mm) swap to Iced Green Transp
At layer #24 (2.04mm) swap to White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)