NotTooShabbyCreations

cover

IMG20231028123300.jpg

IMG20231028123234.jpg

IMG20231028122927.jpg

IMG20231028100112.jpg

IMG20231028093301.jpg

plate_1.png

plate_2.png

IMG20231028124141.webp

IMG20231028093301.webp

0.2mm layer heightNo supports neededPre colorized with black, red and silver &nbsp;

0.2mm layer, 2 walls, 15% infill

Texas-Tbag

IMG_20240406_142439_b9bd6528-f85e-4fb4-96e4-03277eb6068b.webp

plate_1.webp

plate_2.webp

Screenshot 2024-04-06 140838_308db6eb-cb32-4956-89d6-161a9bad8392.webp

Screenshot 2024-04-06 141254_836076f9-63e6-450e-ae75-29786596fca9.webp

Screenshot 2024-04-06 141307_40c40cc6-11a6-4735-b20a-e4f0e2d3bb89.webp

IMG_20240406_142641_b94fa89c-e69d-4b83-8f52-e433309bbc88.webp

IMG_20240406_142532_54e41e35-8ac9-4b4c-a8eb-4afcef17a89c.webp

IMG_20240406_142511_8f1029d5-ea61-4705-9b66-a69970422e07.webp

IMG_20240406_142408_4f429c71-845b-4025-9db0-7ad1cb2b2a88.webp

This is the same print settings as the original. I just added a single layer of white along the back of the image. This helps with strength and addresses some of the complaints about lightboxes falling into pieces. I also added some cut outs to the back for the USB cable and to hang it on a screw. The cut out for the USB allows the box to sit flat on a shelf of be hung flat on a wall without the cord creating a gap. I used a $5 USB color changing light with remote from the store Five Below. Printed on the A1. I only used black red and white because I printed the bat in white. This way I can change the color of it with the lights inside. Special thanks to the original designer. This thing is awesome.

For the construction of the light box you are going to need a USB wire ( with a switch preferably ) and a 5v cool white led strip.Soldering iron and basic soldering skill required!!!&nbsp;Size: 230mm x 130mm x 40mm

The Batman Lightbox

ASIA

Print Profile(2)

Description

Comment & Rating (33)

License

Related Models