Lithophane Frame Stand curved Box Closed

What you need :

1. Create your Lithophane picture here : 

https://tool.itslitho.com/CreateModel?fbclid=IwAR0KwptkrRXLSwPDUypCAV3w8k17ULX74G8Z11TKp9dzuu6ksr_4rmdf01k#/CreateModel

!!! Your picture Size should respect this ratio : 2265x1501 pixel !!!

1. Model settings to be set to fit my stand are the following ones : (Check pictures attached)  
2. Arc / Height              : 150mm
3. Angle                         : 50 Deg
4. Min Thick                  : 0.8mm
5. Max Thick                  : 3.2mm
6. Thinnest Layer         : 0.8mm
7. Tchickness                : 3mm
8. Depth                         : 4mm
9. Angle                         : 45
    

2. My models composed in 2 parts

1. Base.stl 
2. TopCover5mm.stl
    

3. Add any led light strip for better light diffusion forward Lithophane picture

Print Settings

Rafts: No

Supports: No

Resolution: 0.2mm

Infill: 100%

Filament material: PLA/ABS