Search models, users, collections, and posts
Psycho Mantis (hueforge)
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill, blk/wht/gray/blue gray
4.2 h
1 plate
Open in Bambu Studio
Boost
10
17
0
0
6
2
Released
Description
Project: psycho mantis.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
The Model is 143.4x199.99mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.7mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.1
PLA BambuLab Basic Blue Gray Transmission Distance: 1.5
PLA Sunlu Meta Grey Transmission Distance: 2.1
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 4 unique filaments
Swap Instructions:
Start with Charcoal
At layer #8 (0.8mm) swap to Blue Gray
At layer #13 (1.2mm) swap to Grey
At layer #17 (1.52mm) swap to Ivory White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)