Search models, users, collections, and posts
Garurumon Hueforge
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
3.5 h
1 plate
Open in Bambu Studio
Boost
20
25
0
2
7
2
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x112.5mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Basic dark Blue Transmission Distance: 4
PLA BambuLab Basic light Blue Transmission Distance: 4
PETG JAYO White Transmission Distance: 6
This print uses 4 unique filaments
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to dark Blue
At layer #12 (1.04mm) swap to light Blue
At layer #16 (1.36mm) swap to White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)