5.56 Ammo Box - Free 3D Print Model

Search models, users, collections, and posts

31Lacrosse1

Tools>Organizers

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

6.7 h

1 plate

4.7(41)

Open in Bambu Studio

Boost

406

925

1.1 k

445

Released

Description

I made these a while back to store my 5.56 ammo as the store I purchase from sells in bags, not boxes.

Based off Evolving Extrusions 9mm Battlebox - but adapted to fit other cartridges. Check out his fantastic designs here:

https://cults3d.com/en/users/EvolvingExtrusions/3d-models

Comment & Rating (72)

@user_383177432

Print Profile

0.2mm layer, 2 walls, 15% infill

The well for the round does not fit a 556.The lid catches on when you try to close the lid. I also tried. a 9mm and the circumference of the well holes is too small.

@itsmiami

Push the insert in harder!

(Edited)

@user_2561578078

had the same issue. After pushing that bar with holes harder, I was able to fit 223 rem rounds.

@Push41

Replying to @user_2561578078 :

Was this a super tight fit for you? I had to put it on a table and use a ton of force to get the insert in all the way. Also my lid closes far enough to lock on, but not fully flush against the front. Close but no cigar.

@Arumanus

Boosted

I recant my comment after much pressing I got it in I hadn't at a wrong angle sorry bout the bad rating

@Arumanus

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

the rounds don't fit for 5.56

The profile uploader has replied

@user_3865188471

push the insert in more, it requires a fair bit of force.

@Arumanus

Boosted

I did the bullet can't go deep enough

(Edited)

@user_1701004483

lastly, the 556 name plate printed blank.

The designer has replied

@user_3865188471

Try my new print profile, other guy did not put any effort into it, just was looking for points. let me know how it goes thanks!

@user_1701004483

does not scale well with 556. printer box doesn’t hold ammo.

@itsmiami

Push the insert in deeper. It requires a lot of force.

@user_2561578078

that’s fine box for fine ammo.

@user_96575114

this turned out way better than expected thank you....

@user_3103311773

Excellent box and clean fit for each piece. Definitely making more. If I could make one suggestion it would be to increase capacity. I'd love to print a 100rd box for 5.56 storage. I decided to delete the face plate because I liked the beveled look.

(Edited)

@user_1701004483

the top needs to be printed face down (large surface area down first). the lid messed up during printing.

@heretic.2190

The print profile is no longer public

Other Issues:the parts do not match the box and lid are the wrong files. Definitely not the 556. Other than that it is a good file.

@user_3865188471

I did swap out some files the other day, from my end on the "3d preview" they look to be correct now. The lid should be universal for all sizes so just the base should need to be re-printed in your case. The two print profiles look to be made with the incorrect base, downloading the stl directly should correct it. Love how the textured PEI plate looks on the top, much cleaner than my Ender 3s stock glass plate!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.