Storage Box-v2-收纳盒v2-No Hardware Needed-无需五金

Previously, I released a set of storage box models and received a great deal of feedback. This time, based on everyone's suggestions, I have upgraded the storage box models and provided four sizes for download. They are easy to print, require no hardware, and can be used directly after printing.

The available sizes are:

• M Single Layer: 16×7.5×3.3cm
• M Double Layer: 16×7.5×4.7cm
• S Single Layer: 8×7.5×3.3cm
• S Double Layer: 8×7.5×4.7cm

Key updates:

1. Increased hinge clearance. The original hinge design was good, but increasing the clearance improves printing tolerance.
2. Redesigned latch. The previous latch was difficult to open after closing. The new latch is easier to open and has greatly improved both printing tolerance and structural stability.

Tip: To improve the success rate of printing, clean the print bed and apply glue stick to the bed before printing. If the filament is damp, it may cause the hinges to stick, so please ensure the filament is dry.

Your support is my greatest motivation to keep creating. If you like my work, giving a boost is the best way to support me.

Previously, I released a set of storage box models and received a great deal of feedback. This time, based on everyone's suggestions, I have upgraded the storage box models and provided four sizes for download. They are easy to print, require no hardware, and can be used directly after printing.

The available sizes are:

• M Single Layer: 16×7.5×3.3cm
• M Double Layer: 16×7.5×4.7cm
• S Single Layer: 8×7.5×3.3cm
• S Double Layer: 8×7.5×4.7cm

Key updates:

1. Increased hinge clearance. The original hinge design was good, but increasing the clearance improves printing tolerance.
2. Redesigned latch. The previous latch was difficult to open after closing. The new latch is easier to open and has greatly improved both printing tolerance and structural stability.

Tip: To improve the success rate of printing, clean the print bed and apply glue stick to the bed before printing. If the filament is damp, it may cause the hinges to stick, so please ensure the filament is dry.

Your support is my greatest motivation to keep creating. If you like my work, giving a boost is the best way to support me.

Printing Tips: As some parts of the model have a small contact surface with the heated bed, they may detach from the heated bed during the printing process. To increase the printing success rate, please clean the printing plate with dish soap and spray glue before printing. Using a low - temperature warming printing plate can significantly enhance the printing success rate.

Feel free to leave a comment if you have any suggestions or questions about the model. When problems occur, please tell apart whether the issue is caused by the model itself, the printer, the filament, or improper operation and installation on your own part. I will block users who blindly attribute printing failures to the model and leave a one-star rating simply because they are unable to troubleshoot and fix problems by themselves. Such behavior greatly undermines the efforts of open-source creators.

有任何关于模型的建议或疑问，欢迎评论留言。出现问题时，请先区分原因：是模型本身、打印设备、耗材，还是个人操作与安装不当造成的。对于自身没有排查和解决问题的能力，却一味将打印失败归咎于模型并给出一星差评的用户，我将进行拉黑处理。这类行为会严重辜负开源创作者的心血与付出。