Mega Brick Gundam Outfit (Helmet, Sword, Shield) - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

Chicken Beauty

Toys & Games>Other Toys & Games

IP Report

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 2 walls, 7% infill

Designer

19.4 h

5 plates

5.0(6)

0.16mm layer, 2 walls, 7% infill

Designer

12.6 h

2 plates

4.6(8)

Open in Bambu Studio

Boost

327

802

489

122

Released

Description

Mega Gumdam Outfit for 1:10 scaled brick miniature

320% scaled Helmet set
370% Scaled Weapon set

LINK for the 1:10 miniature: https://makerworld.com/en/models/48116#profileId-50020
NOTE: The helmet on the picture is overly scaled(413%) for the original model above, so looks a little too big.

The print profile file is adjusted(320%) for model, and should have a better fit. I just don't want to waste all the filament to print the adjusted model again.

Comment & Rating (35)

@WhatChelleIMake

Boosted

Print Profile

0.16mm layer, 2 walls, 7% infill

Really awesome and nostalgic design! Resized it to 175% for a Big Brick/lego figure that is closer to 6:1 than the original 10:1, but it was still slightly too big. 174% would have probably been better.

@youngien

Boosted

That is one NICE Eye glass and expression, is it printed with sticker or actually 3 color printing?

@WhatChelleIMake

Boosted

Replying to @youngien :

Good eye, it IS a sticker! I’m working on making it a 3D print though. Let me know if you’re interested and I can let you know when it’s ready!

@youngien

Boosted

Replying to @WhatChelleIMake :

For sure my man! Thank you!

@user_1037450509

Can also confirm the current profile for the helmet does NOT fit the Lego minifigure Update: helping anyone trying to print this, I scaled it up to 330.50% and made it fit the Lego head. The diameter of the opening of the helmet scaled up was 103.5mm whereas the Lego head is 102mm. I would scale down a little bit more if I were to do it next time for a tighter fit.

(Edited)

@user_998168091

Does not fit a 10:1 head

Show original

@GWOTTRAPLORD

dang I should have read the comments lmfaooo nooooooo

@Kimma_Makes

Boosted

Print Profile

0.16mm layer, 2 walls, 7% infill

@sosreed

how did you get it to actual Lego size

(Edited)

@Kimma_Makes

Boosted

Replying to @sosreed :

It's been a while but I remember going through a lot of trial and error by scaling the helmet to fit the lego figure i had.

@GWOTTRAPLORD

Print Profile

0.16mm layer, 2 walls, 7% infill

had to print the helmet twice since the first time it was off. comments said 330.50% Wich was great has some wiggle room but still functional-eye plate was from a different set

@C_CLICKS

Boosted

this is my rendition of the Lego x gundam mega brick. I scaled the helmet to 330.50% for a perfect fit. I also used red transparent filament and added a led strip to the beam saber! the shield is a bit heavy so will have to figure out how to get it to hold up in the air. but other than that I love this print and my rendition!! thank you so much to the creator of these files!!

@youngien

Boosted

I did use Mitutoyo Caliper to measure my giant figure's head size, I than measure fit and tightness inside Bambu Studio, the problem I ran into is when measuring ID for the helmet, the tools inside Studio won't pick up the inner diameter's ring correctly, thus, I never really get the confidence where the helmet will fit tightly with the figure's head. What I ended up doing was to print the helmet individually with out the Spikes, braking this into two Objects and Two parts, than use slice and making sure the Gcode only run for about 20 layers so I get the ring shape of the helmet's bottom and try to fit the helmet's first 20 layers on to the head, it was perfect tight fit! Awesome design, thank you so much. When it comes down to my choice for build, I opted for Bambu Matte Charcoal, giving it a little Darth Vibes and Matte Red lusting for blood, however, after printing it out, the red looks a little more orange under my 2700k Display light. If there is one thing I would do differently, I would print the waist line in the same red color as well. I am very happy with finding this here. Once again thank you so much.

(Edited)