🌢 Droplet Hanging Bird House - Free 3D Print Model

Search models, users, collections, and posts

Triple G Workshop

Household>Pets

IP Report

Print Profile(2)

All

X1 Carbon

P1P

X1E

H2C

H2D

H2S

H2D Pro

P2S

P1S

A1 mini

X2D

A2L

0.2mm layer, 4 walls, 5% infill

3.6 h

1 plate

4.9(48)

0.2mm layer, 2 walls, 5% infill faster print but less strength overall also added A1 mini

3.6 h

1 plate

4.6(8)

Open in Bambu Studio

Boost

169

321

529

411

Released

Description

Boost Me (for free)

No supports needed - Includes a break-away support.

Membership

Join

Comment & Rating (66)

@mtaphorn

Print Profile

0.2mm layer, 4 walls, 5% infill

Filament Auto-Switched overnight and I ended up with a very cool birdhouse...

@MooteBuilds

Print Profile

0.2mm layer, 4 walls, 5% infill

bad support settings are nearly solid on model

The profile uploader has replied

@Nates

I'll reprint and take a look it should only have the break-away support. Thanks for the heads up.

@Nates

I hit open in bambu studio and reprinted it and don’t see where the support was just the breakaway at the end. Try a reprint it should look just like this. Feel free to dm me if you have any questions.

@MooteBuilds

well something is off. here it is printed with handy. printed two and second picture is where I tried removing. This was printed with bambu handy, so it uses the settings there. unsure

@Gaspertt16

Print Profile

0.2mm layer, 4 walls, 5% infill

printed perfect in petg on the a1 mini

@Swflmelo

Print Profile

0.2mm layer, 4 walls, 5% infill

it came out awesome. one of my first prints on my X1 Carbon. Thank so much for sharing this with everyone. 👍🏼👍🏼

@Tango8263

Boosted

Print Profile

0.2mm layer, 4 walls, 5% infill

No birds yet, but it printed really good, thank you...

@SirDavid

Print Profile

0.2mm layer, 4 walls, 5% infill

Great print, could use ventilation and drainage holes but works great in a covered cool area! top is very pointy!

@user_3354316622

Print Profile

0.2mm layer, 4 walls, 5% infill

I truly enjoyed this design; I added drainage holes, increased the scale by 15%, and incorporated a fizzy skin effect on the outer perimeter

Show original

@user_3602260264

Boosted

Print Profile

0.2mm layer, 4 walls, 5% infill

very good. came out well. had a small line on the front but might have been me taking off the support

@tffx

Boosted

Print Profile

0.2mm layer, 2 walls, 5% infill faster print but less strength overall also added A1 mini

looks great

@MysteryMachine

Boosted

Print Profile

0.2mm layer, 4 walls, 5% infill

should have a drainage hole for water, I printed this and put it outside in a tree before a storm and it had water on the inside. I drilled a hole to keep this from happening again.

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Shingled Birdhouse and Ladybug House

VegaWoodWorks

14.3 k

7.5 k

Classic bird feeder, octagonal house.

Techro3D

12.1 k

7.8 k

Modern Bird Feeder

Tord Asnes

15.8 k

7.2 k

Bird house

officinebla

1.7 k

1 k