丰川祥子

cover

8e2a4d34e1a9ff27d4cfc2dda1c1262_e66eced7-cdf4-488a-88cc-b197c8294a36.jpg

71ce7b5568d3f03fdb71c6ae40a9ad4_548c559d-8b9c-42cd-ba23-df6230b2da5b.jpg

c1eac81ac1851271e64e03aedfe0c9e_2963e014-eed9-4b1b-88de-afa47014ba70.jpg

plate_1.png

8e2a4d34e1a9ff27d4cfc2dda1c1262_e66eced7-cdf4-488a-88cc-b197c8294a36.webp

plate_1.webp

拆手部支撑的时候请小心谨慎，手部支撑很脆弱

Please be careful when removing the hand supports, they are fragile.

0.08mm layer, 3 walls, 10% infill

photo1719581880.jpeg

photo1719581971 (1).jpeg

photo1719581971.jpeg

photo1719581942.jpeg

photo1719581892.jpeg

photo1719581867.jpeg

2024-06-28_7f59b886d4af

50% scaled down (small, see picture on the A1 mini led so you can understand how small it is) and placed him on his back with normal support that were modified as below (please note there will be some artifacts on the back, see picture, if you don't want these don't use it):Support Overhang Angle Increased to 45° from 15° for reducing the number of supports by allowing steeper overhangs without support.Top Z Distance: Increased to 0.1mm from 0.06 mm to try and reduce the bonding between the support and the model.Bottom Z Distance: increased to 0.15 mm from 0.08 mm again reduces bonding and makes support removal easier.Support Pattern: set to Lightning for minimal material usage while still supporting overhangs effectively.Support/Object XY Distance: increased to 0.7 mm from 0.45 mm, for easier removal from the model.Don't Support Bridges: Enabled&nbsp;0.08mm layer height, 3 walls, 10% infill, Slowed down initial layer for better adhesion on the A1 mini&nbsp;

[50% scaled on his back] 0.08mm layer, 3 walls, 10% infill

Master Chief - Halo

待命士官长士官长在等待命令的下达，以及，征服！！！&nbsp;Standby Master Chief The Master Chief is waiting for orders to be issued, as well as conquering!!!

Standby Master ChiefThe Master Chief is awaiting orders and, conquest!!!&nbsp;Standby Master Chief The Master Chief is waiting for orders to be issued, as well as conquering!!!

Standby Master Chief

ASIA

Print Profile(2)

Description

Comment & Rating (205)

This remix is based on

License

Related Models