GKTWO DRIP ADAPTOR (Updated)

This part allows you to set the build plate of your GKtwo upright so that excess resin drips off your models.
This then puts less liquid resin in your cleaning solution which keeps it cleaner longer.
The lid of the GKtwo can still be closed when this part is in place.

Here's a video explaining why I designed it.
https://youtube.com/shorts/HBtRUPURH5Q?feature=share3

Please Note
This part was designed to be used when the build plate arm is at its highest position. Meaning, the position that the build plate raises to once a print is finished.
Make sure the Drip Adapter is set against the lip of the build plate, as seen in the second picture.

UPDATE

Someone said that newer models have a Z height of 250mm instead of 245mm. So I have added a second model with a wider tip to account for this.

3D Print Settings Used:

I printed this on an FDM printer using PLA.

Layer Height: 0.2mm
Supports: No
Build Plate Adhesion: Skirt
Infill: 20%