Search models, users, collections, and posts
Foot Pump for Inflatables
IP Report
Print Profile(2)
PETG + TPU -0.2mm layer, 4 walls, 10% infill
Designer
12.8 h
2 plates
Tubes - 0.2mm layer, 4 walls, 10% infill
Designer
1.6 h
1 plate
Open in Bambu Studio
Boost
74
167
8
1
153
47
Released
Description
This is a functional Foot Pump, right now it has all the functions to inflate pool inflatables or balloons. You can print the tube for more range, you can add multiple. It is strong enough to be pushed with feet or shoes. A1 Mini friendly and tested.
Materials:
- Base and valves are printed with PETG. PLA has issues.
- The pump prints only with TPU!
Assembly:
- After printing you need to push the ball inside each valve ( with pencil, screwdriver etc.), it will loosen very easily and work inside the valve, outlet and inlet.
- Place the TPU pump in the base, align the holes
- Stick the valves through each side, align the small holes
- Secure with the TPU Clips
- Add the TPU tube (or more) and the adapter to the outlet
- Pump it up!
DON‘T PUSH THE TPU WITHOUT THE BASE
Enjoy!
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (8)