Napkin holder (WIND RESISTANT)

It's a simple napkin/paper towel holder for indoor and outdoor use you can use it in the kitchen, on the table and at a wedding.

IMPORTANT NOTICE! The size of the napkins should be 15x15cm or less.

You can easily pull out napkins/paper towels from the holder even with the “wind protector” on.

The wind protector protects your napkins/paper towels from getting blown away by the wind.

I demonstrated that in the video below.

The wind protector is a separate print if you wand wind protection outdoors and indoors.

And if you are going to be using the “Napkin holder” placed on smooth surfaces then i recommend buying some rubber stick-on feet. Its completely optional but if you are using it in your room and don't want to buy rubber feet you can press it down lightly and pull out a napkin/paper towel.

This is how it looks when printed

MAKE SURE THE ARROWS ARE FACING THE OPENING OR UP FROM THE OPENING!!!

Just to make sure you don't break the wind protector.

The wind protector take around 30 min,

and the holder around 3 hours on normal speed on a P1S

PLS report any problem with the print in the comments

bye :)