Elias

0.2mm layer, 2 walls, 15% infill

Ja, oder? Hab meinem Nachbarn auch wieder 5 gedruckt weil seine Peperonis vereinzelt werden mussten. Danke für das schöne Foto.

Yes, isn't it? I also printed another five for my neighbor because his pepperonis needed separating. Thank you for the lovely photograph

Tobitulpe

Most welcome, and thank you for the photograph

Valerii Bokhan

habe den untertopf in ca 6x6 cm in PETG druckt
passt perfekt. 

printed the under pot in about 6x6 cm in PETG
fits perfectly

MoGeNa

Myflower%garden252

Great print profile! The settings are well optimized and the final result came out clean and precise. The print quality is smooth with no visible defects, and everything fits perfectly as expected.

Highly recommended for anyone looking for reliable and consistent results. Will definitely use this profile again! 💯

ANGEL

Alfmor

Just what I needed! Scaled up by 10%, came out perfect, thanks!

LokiKoki

Skelly_Dog

Phatbob

OzanM.Asutay

cover

2024-06-25_aca64uqq259x.png

plate_1.png

Screenshot 2024-06-25 150451.jpg

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Danke</boostcontent></boostme>Small seedling Pots. The pots are about 6 cm tall. This makes a great start for your plants and they can be reused several times.Little Material used. 0.8 mm walls, means two walls on most filament printers, but still sturdy. In Cura uncheck the &#34;Print thin walls&#34; feature under the Shell tab, otherwise it produces unnecessary fragments. Dont know about the other slicers...Happy gardening TobiKleine Pflanztöpfchen. Die Töpfe sind etwa 6 cm hoch. Damit gelingt ein schöner start für Deine Pflanzen. Sie können mehrfach benützt werden.Es wird wenig Filament benutzt. 0,8 mm Wandstärke, (zwei Reihen bei den meisten Filament Druckern) trotzdem stabil. In Cura, das &#34;Print thin walls&#34; Feature im Shell Tab deaktivieren. Mit dem Feature entstehen seltsame Artefakte. Ich weiß nicht wie es mit den anderen Slicern aussieht.Viel Spaß beim Gärtnern Tobi

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Thank you</boostcontent></boostme>Small seedling pots. The pots are approximately 6 cm tall, providing an excellent start for your plants and allowing for repeated use.Minimal filament is consumed. 0.8 mm wall thickness—resulting in two walls on most filament printers—yet remains robust. In Cura, disable the "Print thin walls" feature within the Shell tab; otherwise, superfluous artifacts are generated. The effect on other slicers is unknown.Happy gardening Tobi

Print Profile(1)

Description

Comment & Rating (17)

License

Related Models

Seedling Pot – Pflanztöpfchen

Print Profile(1)

Description

Comment & Rating (17)

License

Related Models