Modular Window Exhaust System V2
Print Profile(3)
Description
Membership
💸 Start making money today 💸 — Sell physical prints from ALL of my designs. My commercial license gives you rights to print and sell with limited restrictions.
Boost Me (for free)
Boosts are always appreciated! — Your support makes these designs possible!
Designed these parts to hold my window open and attach a 4 inch exhaust hose from my P1S. This fit my window, however please test fit the 15mm wide prop before printing larger pieces for your own to verify fitment.
-Fits window thickness of 32mm and any length.
-Print all parts besides the pins on the flat side surfaces.
-3 walls at 5% infill is recommended to conserve filament.
-Left and right end pieces have a wider flat end for better seal.
-Left end piece is meant to be used with this magnetic hose adapter. Attach with JB Weld or double sided tape: https://makerworld.com/en/models/374008#profileId-273985
If unsure and want to test if this will fit your windows thickness, I would recommend printing the 15mm wide model first. If it fits, measure the width of your window and print the appropriate parts needed. Every part connects with 2 printed pins and is recommended to be permanently bonded with adhesive or tape for a better seal.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (307)