Print Profile(1)
Description
Boost Me (for free)
You like the Design? Consider using your boost tokens to help and support me for free!
- Want to earn easy reward points? Rate the print profile by going to the Rating link on your Profile drop down menu.
- My own link is https://makerworld.com/en/@neocrisis/rating
this is from One-Piece chapter1118
- I accidentally used grey not white but still turned out good
Print at 100% infill with a layer height of 0.2mm with a base layer of 0.16mm
The Model is 200x148.76mm in size
You may print at higher layer heights below the Min Depth of 0.56mm
The Max Depth is 2.6mm and the Actual Depth is 2.2mm
Swap Instructions:
Start with Black
At layer #8 (1.56mm) swap to White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)