NES Cartridge Display

V2 with lower filament usage and less print time can be found HERE.

Back with a new display stand for NES (Nintendo Entertainment System) Cartridges! Tired of your NES games not having a proper home? Well not anymore! This cartridge display stand holds up to 10 NES cartridges and can stand vertically, or laid down on its back for horizontal storage. The slots are angled downward at 5° to help prevent the cartridges from slipping out. I tried my best to design the sides of the display to mirror the top of the Gen1 NES (I do realize they should have crossed over to the top, but I didn't).

Multiple options for print profiles: multicolored, dual-colored, and monochrome. Each of which has options for ironing or no ironing. I tried both, and there isn't too much of a difference between the two. I slowed a lot of the speed and acceleration down to help provide the best quality. Feel free to change the settings to your desire should you not want to wait this long for the print. This print can be completed on its “back” with the opening and letters/words facing upward. Supports ARE NEEDED for this print due to the side inlay designs. You could get away without supports, but it's only ~20g of filament and it does make a much nicer finish. Using another material for support interface such as PETG makes for easier support removal.

Thanks so much and enjoy!