Balatro - Joker - Misprint- HueForge
Print Profile(2)
Description
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
The Model is 67.73x90mm in size
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.3
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
PLA BambuLab Basic Cyan Transmission Distance: 1.9
PLA BambuLab Basic Orange Transmission Distance: 5.9
PLA BambuLab Matte Scarlet Red Transmission Distance: 1.9
PLA BambuLab Basic Gray Transmission Distance: 0.4
PLA Polylite Cold White Transmission Distance: 0.8
This print uses 7 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.52mm) swap to Ivory White
At layer #14 (0.68mm) swap to Cyan
At layer #21 (0.96mm) swap to Ivory White
At layer #24 (1.08mm) swap to Orange
At layer #35 (1.52mm) swap to Scarlet Red
At layer #39 (1.68mm) swap to Gray
At layer #41 (1.76mm) swap to Cold White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (15)