SAMSUNG GALAXY S20 FE TPU CASE - Free 3D Print Model

Search models, users, collections, and posts

dayneorders

Hobby & DIY>Electronics

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.12mm layer, 3 walls, 25% infill

Designer

1.4 h

1 plate

4.7(69)

Open in Bambu Studio

Boost

278

501

1.4 k

783

Released

Description

Samsung Galaxy S20 FE TPU phone case i designed. Printed With Bambu Lap TPU at 235degrees.

I pride myself in my work, so constructive feedback welcomed if your giving a low rating.

Comment & Rating (89)

@PRINTNIC

Boosted

Print Profile

0.12mm layer, 3 walls, 25% infill

i can higlhy recommend ti dry your tpu before printing. I got it fresh out the Box and used it directly without drying it. the print was horribly. dryed it out, printed it again and now it looks awesome, the Buttons fit and everything is perfekt.

(Edited)

The profile uploader has replied

@dayneorders

the buttons would be the last thing I thought some one would have issues with. I printed this case plenty of times to ensure printability. have you tried printing on a 45degree angle as suggested, as I found this helped alot with print quality

@PRINTNIC

Boosted

Replying to @dayneorders :

yes, i tried 45 degree angle, and youre right. Its way better if you Orient it that way. but the Buttons still doesnt fit quite right. i get my filament dryer These dass, will print it again right out of the dryer to ensure the tpu is dry. will add Photos and another comment after this attempt. thanks for your Answer.

@adliner

Replying to @dayneorders :

What difference does different angle on the build plate make? What does exactly get better in terms of quality?

(Edited)

@DadQuadz

printed with overture hs translucent tpu on my x1c. First ever tpu print, went awesome imo 👍only thing offhand to make it better would to make the edges textured instead of smooth, feels a bit slick in the hand (not sure if thats a translucent quality or not)

(Edited)

The designer has replied

@dayneorders

Thanks for the review, really appreciate it. how did it fit? Textured would come down to personal preference, I'm in the middle of printing a case for my Samsung galaxy s24 ultra. I've tried a few different plates as per below, and I absolutely hated the feel of the textured build plate one I done.

@DadQuadz

Replying to @dayneorders :

Fitment is great, and after about an hour I came to the same conclusion about the textured plate feel. Weird ass hell on the fingers lol but obviously that all user error!

@guier

Boosted

Very beatiful model, the best i've found to my S20 FE. Changed the buttons to bigger with full infill, in my first try, the default power button does not worked well

@JonesWithBones

Did it work any better? And if so could you please share your file? Have the same problem with the buttons not working that well

@fedeve

Boosted

Print Profile

0.12mm layer, 3 walls, 25% infill

fits really well, on the bottom is just a tiny larger nedd to be squezed a few mm

@user_1781641174

Print Profile

0.12mm layer, 3 walls, 25% infill

printed with heat sensitive TPU fits great

Show original

@P1PUsers

Print Profile

0.12mm layer, 3 walls, 25% infill

Feels amazing. Looks amazing. I printed in Sunlu TPU Silk. (Update) This phone case, by far is more durable and protects my phone better than any other case jver ever owened, and was cheaper!

(Edited)

@senpai92360

Excellent print, I just reduced the length to 99.5% so that the shell properly encompasses the phone Be careful however for those who use thick cables, the charging hole is a bit small but with a little force it's fine

Show original

@user_3321329839

Can someone help me. I printed this on the A1 mini with TPU flax filament. At 235 degrees, slow speed. Bed at 65 degrees. I'm new, so I don't know if there are other settings. The material arrived well sealed with vacuum. But I truly don't know the cause of the problem. The cover failed, and its sides didn't even form

Show original

@luckEEEr

Print Profile

0.12mm layer, 3 walls, 25% infill

With some post-processing, a good print. Settings are okay, could perhaps be optimized, but it could also be the material

Show original

@NerdPlow

Boosted

Print Profile

0.12mm layer, 3 walls, 25% infill

GREAT PRINT, Much Stonger than i expected. I had 2 strings that caused Zero issues, and super minor corner 'fray' .. nothing that i little clean up didnt fix :) Just in case anyone need to know .. 'S20 FE' and S20 FE '5g' = SAME SIZE CASE. Thanks Creator, will boost when i have one!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.