Samsung remote control cover - TPU - Free 3D Print Model

Search models, users, collections, and posts

fruxo

Household>Other House Models

IP Report

Print Profile(2)

All

A1 mini

X1E

P2S

X1 Carbon

H2D Pro

H2C

P1P

H2D

H2S

P1S

X2D

A2L

[TPU] 0.2mm layer, 2 walls, 15% infill - with support

Designer

1.4 h

1 plate

4.5(29)

[TPU] 0.2mm layer, 2 walls, 15% infill - without support

Designer

1.3 h

1 plate

4.5(2)

Open in Bambu Studio

Boost

174

440

559

362

Released

Description

Sick of your kids breaking the remote control? I know I was. So I created this simple cover.

My tv is the samsung frame, but I'm sure other samsung models use the same remote as well. Just look at the photos to see the remote it was designed for.

This needs to be printed in TPU. The pattern on the back is from my holo plate and not part of the model itself.

Comment & Rating (48)

@OpusBerlin

Print Profile

[TPU] 0.2mm layer, 2 walls, 15% infill - with support

fits net 🫡...

The profile uploader has replied

Show original

@fruxo

What material did you use, pla? If you print it in tpu as required, it should definitely fit for the remote in my photo (I can't tell if you have the same remote)

(Edited)

@fruxo

actually, IF you printed in tpu (I don't know), did you remove the supports? I'd love to see a photo from the front that shows the full remote and cover

(Edited)

@t0m4s

Print Profile

[TPU] 0.2mm layer, 2 walls, 15% infill - with support

@fruxo

Printed in glow-in-the-dark tpu. Game changer. It's a cheap no-name filament from Ali express, but printed perfectly fine.

@ZuniFam

Print Profile

[TPU] 0.2mm layer, 2 walls, 15% infill - with support

it doesn’t fit and they’re the exact same

The profile uploader has replied

@fruxo

Can you expand on this so I can understand what is going wrong. Did you definitely print in tpu? Did you remove the internal support? Since it's tpu, even with some variances in printer precision, the material should have some flexibility to accommodate for that and I don't understand how it couldn't fit.

(Edited)

@ZuniFam

Replying to @fruxo :

no I did no print in TPU

@fruxo

Replying to @ZuniFam :

OK that explains it. This is for TPU only as per description. So far I think everyone that has given a bad review and said it doesn't fit has printed in a different material for some reason :( thanks for letting me know

(Edited)

@Campe112

Print Profile

[TPU] 0.2mm layer, 2 walls, 15% infill - with support

This should be made of rubber, the measurements are incorrect for PLA

The profile uploader has replied

Show original

@fruxo

Both description and profile clearly states that it's only for tpu and not for pla

@user_2183114904

It states it’s for tpu

@user_4160192396

not sure how you are supposed to get the remote into the case without breaking it

The designer has replied

@fruxo

You need to print it with TPU

@Simo77

Please, could you add the model of remote

The designer has replied

@fruxo

As mentioned, it's for the "Samsung frame" tv. Not sure if other models use the same remote, but you can just compare yours with the photos where I'm showing both a white and a black version of the remote.

@Ivtigre

Print Profile

[TPU] 0.2mm layer, 2 walls, 15% infill - with support

It does not match the remote's dimensions

The profile uploader has replied

Show original

@fruxo

Did you print it in tpu? It will not work in pla as mentioned in the description. It definitely matches the dimensions. I've edited the print profile name to make it even more clear that it's for TPU.

(Edited)

@user_765784442

Will this work with PLA

The designer has replied

@fruxo

Not as is. You can cut the top off in Bambu studio (very easy to do) and then slide it in if you wanted to print it in pla. You might have to cover the hole with some tape to stop it from sliding out though. I also don't know how durable it would be, the pla might break if dropping it. If you end up giving it a try, let me know how it goes. EDIT: actually, even if cutting the front, you probably won't be able to just slide it in. I kept the dimensions tight with expectation that the tpu would flex. Gives a nice fit for tpu, but I suspect it will be too tight if using rigid pla.

(Edited)

@KMPNI

Print Profile

[TPU] 0.2mm layer, 2 walls, 15% infill - with support

reduced the length and then it fits to a newer version pf the remote

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

The Perfect TPU profile

AllFor3D

23.6 k

5.3 k

Modern Remote Holder

JB Custom Designs

22.8 k

4.9 k

CyberBrick Official Standard Remote

CyberBrick

31 k

4.1 k

Samsung remote control cover

ALBY_3D

293