University of Texas Longhorn Mini Print - Free 3D Print Model

Search models, users, collections, and posts

McMedia Productions

Generative 3D Model>Image to Keychain

IP Report

Print Profile(2)

All

P1S

H2S

X1 Carbon

X1E

H2D

P1P

H2D Pro

A1 mini

P2S

H2C

X2D

A2L

Longhorn Logo with Keychain Hole 0.16mm layer, 2 walls, 50%

Designer

23 min

1 plate

4.7(6)

Longhorns LOGO ONLY 0.16mm layer, 2 walls, 50% infill

Designer

22 min

1 plate

5.0(13)

Open in Bambu Studio

Boost

121

457

281

Released

Description

edit MakerWorld took down the original print profile because I forgot to upload a picture of the print. Oops. Whatevs it benefits YOU because there are 2 new print profiles, Improved and compatible with all printers. Printed at .16 Layer Height and 50% Infill just because. Takes a little longer to print, if you want a quicker print, just drop the infill to 25 or 15%. The first two pictures are the updated printed and I was sure to upload the picture on the print profile as well :)

These were NOT printed on a 3D Sheet for the additional razzle dazzle, but still applies.

*I did lose all the likes and boosts on the print profile that got removed. Just sayin' ;)

Personal Model of the University of Texas Longhorn Logo. Scale it as small or as big as you would like. Should print fine. Boolean a hole somewhere on it and make a keychain out of it.

Modelled off of a picture from Google.

Hook 'em!

Prints in like 15 minutes.

Example was printed on a 3D Sheet for extra razzle dazzle.

Comment & Rating (27)

@user_3561111406

Print Profile

Longhorns LOGO ONLY 0.16mm layer, 2 walls, 50% infill

My very first print on my A1 Mini. I chose this because I'm an alum and my first spool is orange. came out perfect with curves and everything.

The profile uploader has replied

@mcmediapro

Glad it printed well for you!

@sgpigeon

Print Profile

Longhorns LOGO ONLY 0.16mm layer, 2 walls, 50% infill

worked great!

@funk74

Print Profile

Longhorns LOGO ONLY 0.16mm layer, 2 walls, 50% infill

printed perfectly. used it for a grad party.

@user_1785544284

Print Profile

Longhorn Logo with Keychain Hole 0.16mm layer, 2 walls, 50%

Very Cool!

@Gerf12

Print Profile

Longhorn Logo with Keychain Hole 0.16mm layer, 2 walls, 50%

The key chain hole should be a little thicker, as it will wear the fastest

@mcmediapro

The print profile was pulled and all boosts and points from this print profile were taken from me. I obviously have a picture of the print as successful. I will try and get another print profile uploaded ASAP.