I printed a lot of these and connected them. it worked perfectly.

Maker

0.28mm layer, 2 walls, 5% infill

Angelol

noone

I made a connector piece. I can add a profile, but basically I cut one link in half and added small snap fit connectors. I needed very long ones for our Halloween costumes.

MailingRacing

Perfect addition to the bigbrick spawn.
added glow in the dark highlights
https://makerworld.com/models/924661

Aido Face

ZillionD0g

24 LINKS NO SUPPORT 0.28mm layer, 2 walls, 5% infill

Peepstore

Broken40

Passt alles wunderbar, nutze es für eine Darstellung als Ork

Everything fits perfectly, I use it for an Orc representation

AbenteuerFuchs

Connect two chains together with this connector

Maaght

8x Length (64 Links), 50% scale

Skatesta

Robg

Printed on A1 with with bambu lab  PLA silk+. Came out great.

Painleecher

Japrusek

cover

2024-06-19_bwlxkv68ff8z.jpeg

plate_1.png

20250919_135350.jpg

Screenshot 2025-09-19 135416.png

20250919_135335.jpg

20250919_135343.jpg

NO SUPPORTS required, 24 per plate.  REMIX&#39;d the spiked chain link to have a tapered opening on one end so that they can be printed flat and then linked together and rotated for any length.  OR use it to connect two or more of the original chains.

Immagine WhatsApp 2024-06-24 ore 11.22.46_ed06b846_3a8b5b26-8b11-4972-b913-164297b58033.webp

plate_1.webp

PXL_20240913_154142499.jpg

PXL_20241024_143909485~2.jpg

PXL_20241026_010848462.MP.jpg

I used this for a costume and need them to be very long. I made a connector you can snap together to connect two chains. A few people asked me to upload the profile to print. This prints at 100% infil because the cost and time difference is minimal and the added strength is worth it.&nbsp;If you are going to wear the connected chain or use them for something that needs any strength I would suggest a dab of glue to join the snaps together.&nbsp;This prints with supports but they have a .24 gap for the .20 height which makes them very easy to clear with a smooth surface.&nbsp;<ul><li>0.2mm layer, </li><li>2 walls, </li><li>100% infill</li></ul>

user_2677670297

img_5209.jpg

img_5206.jpg

Print in place (no assembly needed)Delete link objects as needed for a shorter chain&nbsp;Use supports (I haven't tested trees, only normal auto)50% scale from original model&nbsp;Created on A1&nbsp;

Brim-Yes Supports-Yes Layer 0.2mm Printed from PCCF, it makes a good sound, almost like metal, but PLA is good as well.

Print Profile(4)

Description

Comment & Rating (169)

License

Related Models

Spiked Chain

Print Profile(4)

Description

Comment & Rating (169)

License

Related Models