Makita 18v - Tool & Battery Mount

Copyright Claim

Makita 18v - Tool & Battery Mount

Boost
130
333
85

Print Profile(3)

All
X1 Carbon
P1S
P1P
X1
X1E
A1
A1 mini

0.2mm layer, 5 walls, 20% infill
0.2mm layer, 5 walls, 20% infill
Designer
33.5 h
8 plates
4.9(68)

0.2mm layer, 5 walls, 20% infill, only single battery holder with no support, PETG
0.2mm layer, 5 walls, 20% infill, only single battery holder with no support, PETG
2 h
1 plate
5.0(9)

For A1 Mini 0.2mm layer, 5 walls, 20% infill
For A1 Mini 0.2mm layer, 5 walls, 20% infill
39.5 h
8 plates
5.0(2)

Boost
130
333
85
17
637
611
Released

Description

Tool and Battery mounts for Makita 18v tools and batteries

 

These are nearly universal and will fit a good portion of Makita's tools and is universal for all 18v batteries and like my other tool mount designs are decently strong and shouldn't have any issues holding any of the tools that fit on it.

 

Attach them to whatever surface you want with 2 #8 screws. Tool mounts are best used in a undermount orientation but can certainly be mounted on a horizontal surface if it suites your application. The battery mounts can be mounted in whatever orientation you want as they use the batteries locking mechanism to hold the batteries in place.

 

Ive printed these Pro PLA without issue and regular PLA would probably work fine as well. If you intend to put these in a work truck or trailer i'd probably use something like PETG or ABS otherwise those materials are overkill for a garage or indoor shop.

 

Default profile uses .2 layer heights but you can bump up layer height for a faster print as layer height doesnt matter for these. Ive printed these on Ludicrous speed and did not have fitment issues. There are also a few plates to select from with the difference being manual snug supports added for the battery lock and gives you the option to print with or without supports.

Comment & Rating (85)

Please fill in your opinion
(0/5000)

Boosted
Print Profile
0.2mm layer, 5 walls, 20% infill
perfect fit 💪👌
1
Reply
Print Profile
0.2mm layer, 5 walls, 20% infill
Very nice, solid look and feel.
0
Reply
Print Profile
For A1 Mini 0.2mm layer, 5 walls, 20% infill
nice and solid.
0
Reply
Print Profile
0.2mm layer, 5 walls, 20% infill
worked perfectly, very nice model.
0
Reply
Boosted
Print Profile
0.2mm layer, 5 walls, 20% infill
SUPER print! very very sturdy, battery snaps really cleanly into it! pre sunk holes are perfect. well done! will be using these from now on!
(Edited)
0
Reply
Print Profile
0.2mm layer, 5 walls, 20% infill
Project settings + PETG
(Edited)
0
Reply
Print Profile
0.2mm layer, 5 walls, 20% infill
Perfect, printing the rest i need now :)
0
Reply
Printed with A1 mini, default settings Works great
0
Reply
Print Profile
0.2mm layer, 5 walls, 20% infill
good fit !
0
Reply
Print Profile
0.2mm layer, 5 walls, 20% infill
Super designer. Good setup. A useful aid in everyday life.
0
Reply