Flipper Zero Case - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

Maker Man

3D Printer>3D Printer Parts

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

Flipper Case With Inserts

Designer

4.8 h

5 plates

5.0(7)

Flipper Case Default

Designer

3.6 h

3 plates

4.6(7)

Open in Bambu Studio

Boost

111

241

313

161

Released

Description

Added alot to the model from the 3d case by shutdown on thing verse! I made the case avlible to be used with the inserts that came with the flipper zero. I also made it so there is many combinations so you can have the silicone case with the insert or no silicone case but have the Wi-Fi dev board top. Also made the SD card slot fit in more so the SD card does not rattle like a rattle snake and so the case can actually close. Also made the front holes big enough so they can fit common screws such as a m3 screw.

Customization is through the roof with this case!

Default – Use the insets that came with your flipper zero so your Flipper Zero is protected with the foam and no more scratches!

Case with insets – 3d print the case with already made insets for the Wi-Fi Dev board and the Flipper Zero with silicone case on!

Custom – Mix the bottom and top with either insets or no insets tons of possibility's.

Color

Color in the Flipper logo in Bambu Slicer at the top and remove the first bottom layer to get a flat and not grooved Flipper logo or color in the logo and get a grooved Flipper logo

How to assemble

Either you can use 2 M2 by 20mm for the back hinges and for the front m3 by 20 - 21mm

Or cut 4 nails that are 2mm diameter and cut them to around 2.4mm length slide them in the back hinges and do the m3 by 20mm screws for front and done!

Coming Soon!

Flipper Zero Case with the Flipper Game Module for games on the go!

additivemanufacturing

engineering

deviceprototyping

internetofthings

electronicsengineering

Comment & Rating (37)

@user_2593208913

👍

The designer has replied

@user_1496567353

looks good

@linda2510

Boosted

Very cool template... I print it with the wifi-insert and use metal screws for all moveable sections.

The designer has replied

@user_1496567353

that looks great Good job!

@mastacheemmanue

Print Profile

Flipper Case Default

they forgot to add the inside insert to it. other than tat it is good.

@Shinigamiweb

Boosted

@user_1496567353 Nice work!! Any interest in adjusting the case with inserts to have the bottom Flipper holder be a separate piece? I'm looking for one I can modify (either via bambu studio or physically with a file) to fit the flipper with Silicone case and IR DTECHBlaster attached to the top :) IR DTECHBlaster link, if curious - https://www.tindie.com/products/dtech-lab/flipper-zero-board-ir-dtechblaster/

The designer has replied

@Shinigamiweb

Boosted

By separate piece, I meant to say two separate pieces - lower case shell, and flipper insert

@user_1496567353

I could probably do that when I am able to probably today or tomorrow.

@Shinigamiweb

Boosted

Replying to @user_1496567353 :

That would be amazing!! No huge rush on it, was mainly curious. Haven’t yet learned to edit existing STLs, that’s next on my list. (only had a printer for a week)