Flipper Zero - CC1101 TehRabbitt - Case Pin Cover

This boot cover is made to fit my Flipper Zero - CC1101 Board by TehRabbitt case found at the following locations:

• https://www.printables.com/model/606834
• https://www.thingiverse.com/thing:6122121
• https://github.com/CodyTolene/3D-Printing/tree/main/Flipper%20Zero%20-%20CC1101%20Board%20by%20TehRabbitt%20-%20Case

My print settings:

- Hatchbox PLA
- 0.2mm layer height
- 0.4mm nozzle (line width)
- Enable retraction
- Wall count 3 (+ print thin walls enabled)
- Top/bottom layers: 4
- Infill density: 20%
- Infill pattern: Cubic
- Print temp 200 C
- Bed temp 60 C
- No supports needed

See more designs on my GitHub here: https://github.com/CodyTolene/3D-Printing

Enjoy!