SASSy Design

cover

plate_1.png

2024-06-13_lhxjbaz9o7z0.webp

<ul><li>0% infill, 0 top layers, 5 bottom layers, 3 wall loops</li><li>Layer hight 0.2mm</li><li>Recommended using PLA filament</li></ul>Happy printing!

SASSy Vase mode - 0.2mm layer, 3 walls, 0% infill

capodellatrap

IMG_3427.jpg

Just a 2 wall version to be slightly over 50g of material.

0.2mm layer, 2 walls, 0% infill

eripse

Screenshot 2025-02-06 at 11.18.43.png

Screenshot 2025-02-06 at 11.18.47.png

Screenshot 2025-02-06 at 11.18.50.png

Screenshot 2025-02-06 at 11.18.52.png

0.8mm nozzle, 0.4mm layer, 1 walls, 0% infill

user_331278585

Blumentöpfe jaras konfirmation.JPG

Dieser Blumentopf wird 9,5cm hoch und 14 cm breit. Aud dem Bild sieht man die breite von dem roten und die höhe von dem lila Blumentopf.

This flower pot will be 9.5cm high and 14cm wide. The picture shows the width of the red and the height of the purple flower pot.

14cm wide and 9.5cm high

Kevin

IMG_1632.jpeg

IMG_1634.jpeg

IMG_1633.jpeg

The original design settings from the creator made the pot look nice in photos but it feels very thin, flimsy and cheap. I redesigned this one to include a Cylindrical Center with 15% Gyroid Infil and a 5mm Base Layer. This makes it look and feel way more premium. Yes, it takes longer and uses more filament but it looks and feels so much nicer. I would have done a remix but the original creator doesn&#39;t allow it in their settings so i just uploaded this print profile instead.

Cylindrical Center, 15% Gyroid Infil, 5mm Base Layer

DoubleT

IMG_2218.jpeg

IMG_2219.jpeg

IMG_2220.jpeg

Increased the size and added a negative cyclinder to give it strength and a smooth inside. It uses a lot of filament, but it&#39;s very strong. I&#39;m using mine for a waste bin, not a fan of plants. &nbsp;0.2 layer height2 walls15% infill&nbsp;

Large Size Hex planter or waste bin

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

A simple design with a very characteristic feature of an inverted hexagonal pattern on its exterior. Print information:<ul><li>Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)</li><li>Prints very good in any filament</li><li>The model is scalable to your liking</li></ul>Happy printing!

Print Profile(6)

Description

Comment & Rating (780)

License

Related Models

Inverted Hexagonal Plant pot Planter - Vase mode

Print Profile(6)

Description

Comment & Rating (780)

License

Related Models