DZ Solo Inline Barrel - Free 3D Print Model

Search models, users, collections, and posts

DetroitDartworks

Toys & Games>Other Toys & Games

IP Report

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 10% infill

Designer

2.6 h

1 plate

3.5(2)

0.2mm layer, 3 walls, 10% infill

Designer

2.5 h

1 plate

2.0(1)

0.2mm layer, 5 walls, 25% infill

3.8 h

2 plates

5.0(1)

Open in Bambu Studio

Boost

Released

Description

Summary

This is a 3 shot inline clip for the Dart Zone Solo. It replaces the stock front end (orange pieces and barrel). Simply insert the trigger between the holes and reassemble the blaster as normal.
Performance went from a consistent ~108 fps with DZMax darts to 90-95 (with v1.1 I am seeing 95-105) with all shots in the inline clip. Worker darts showed a greater fps variation both stock and with the inline clip, so I'm recommending DZMax darts for this due to the consistency.

11/25/23 - Added "Tactical" version with built in iron sights and some picatinny rail under the barrel.

11/28/23 - Added a version with a tighter muzzle to account for printer tolerance and dimensional accuracy issues. Use whichever version works better with your printer.

12/2/23 - V1.1 - Air seal Improvements in the back & adjusted the "Tight" versions to be not so tight.

12/5/23 - Added "SuperTactical" version that has an extended bottom picatinny rail and picatinny rails on each side as well. Still prints with no supports. Is it silly? Yes. Have fun.

Print should be oriented correctly in the file (muzzle down so the whole thing prints at an angle). No supports required.

For an extended release lever:

Comment & Rating (10)

@PRINTverything

Print Profile

0.2mm layer, 3 walls, 10% infill

needs a support, at the end it failed

Support Issue:need support to keep it from falling over

Bed Adhesion Issue:failed at the end due to not having support and bed adhesion issues. used two different print profiles and it failed both times

@Emiliobot

Boosted

Thanks again!

@Emiliobot

Boosted

Any chance you could make a profile compatible with an A1 Mini?

The designer has replied

@DDW_Alex

Yep! Can do

@DDW_Alex

New profile uploaded that works for the Mini

@Emiliobot

Boosted

Replying to @DDW_Alex :

Awesome, thanks!

@tenthrow2

Print Profile

0.2mm layer, 5 walls, 25% infill

Printed great! had to slightly trim some edges to get the clip to hold it but after that it shot beautifully. Great inline barrel for the Solo. Thanks for the upload!

@user_613772843

Print Profile

0.2mm layer, 3 walls, 10% infill

works well and does what it says but looks kinda ugly when folded

(Edited)

@user_2240276073

Boosted

this is a big request but do you think you could design a profile with a picatinny on top and no iron sights or even one without iron sights only

@PRINTverything

Print Profile

0.2mm layer, 3 walls, 10% infill

Support Issue:needs supports

Bed Adhesion Issue:fell over at the end of the print

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Kamish Daggers from Solo Leveling

bbush362

2.5 k

1.2 k

Barrel DK multi part XL

Nigh87

5.4 k

2.7 k

Star Wars – Han Solo in Carbonite

Drift's Tech

2.2 k

983

Barrel Planter

Fletch

2.2 k

1.6 k