Removable wall mount for multiple sockets - Free 3D Print Model

Search models, users, collections, and posts

Mellowman

Household>Office

IP Report

Print Profile(1)

All

X1 Carbon

H2S

X1E

H2D

H2C

P2S

P1P

H2D Pro

A1 mini

P1S

X2D

A2L

0.16mm layer, 2 walls, 15% infill

Designer

1.5 h

1 plate

4.9(109)

Open in Bambu Studio

Boost

643

2232

127

1.5 k

1.2 k

Released

Description

Content has been automatically translated.

Show original

Boost Me (for free)

for support

The ultimate solution for your cable clutter!

This robust and cleverly designed holder brings order to your home, office, or workshop. With this two-part system, you can effortlessly mount your power strips or other items on any wall, under a desk, or on cabinets

Why you should print this model:

Size 100mm x 40mm
Flexible & removable: The power strip can be easily and quickly removed from the wall mount at any time – ideal for cleaning or if you temporarily need the strip elsewhere
Versatile mounting: Designed for mounting with screws or double-sided adhesive tape (e.g. 3M VHB)
Universally applicable: The open design fits most common power strips. Simply measure your power strip to ensure the best fit!
Efficient cable management: Hide unsightly cables and prevent the strip from lying around on the floor

Printing instructions:

Recommended material: PLA or PETG for additional stability
no supports required

Multiple Socket Holder Corner

cable management solution

office 3d accessories

homeimprovementprojects

Comment & Rating (127)

@Dr.Schinkel

I found the design daring and the result looks accordingly Printed with a new roll of PETG and without changes to the print profile on A1 mini

The designer has replied

Show original

@Mellowman

It's a shame it didn't work out as you imagined. The provided print profile is for printing with PLA. For PETG, you may need to change some settings. The attached photo shows the model immediately after printing with PLA, still on the print bed of my printer. As you can see from the photos in other reviews, printing works without problems, even if you consider it a "risky construction"

Show original

@user_2291656005

Replying to @Mellowman :

The same thing happened to me with Bambu LAB PLA :-( Update: I printed it again, this time with supports. It worked then

(Edited)

Show original

@Deejaymupp

Print Profile

0.16mm layer, 2 walls, 15% infill

Very nice print! And smart solution 👍🧠🙂 Full marks from me! 5/5 🌟🌟🌟🌟🌟 However, it gets quite tight when the plate that is supposed to sit on the socket outlet needs to slide into the base plate (I have deliberately turned the plate that is to be glued onto the socket outlet so that you can see a little better how/why it gets tight) I am using countersunk screws. I cannot reduce the dimensions as the screw would then go through the hole. I have tested 3-4 different screws, drywall screws, wood screws etc all with countersunk heads. It is possible to get it in place, but it's tight. Perhaps it could be adjusted in some way? Maybe with a slightly thicker base so that a slightly deeper countersink can be made? Or maybe a small groove of about 1mm in the "rail" that slides into the wall bracket itself? What do I know, I can't do this drawing and CAD stuff. I'm glad there are people who create all these things you didn't know you needed until you saw them haha

Show original

@TeXo4

Print Profile

0.16mm layer, 2 walls, 15% infill

Uncomplicated and beginner-friendly. Everything worked great. Thank you very much for providing it as well as your time. Please keep up the good work. - Bambu Lab P1S - PLA+2.0

Show original

@user_2539109631

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Hi! I absolutely love your design it works really well. I’m wondering if there would be a possibility of getting a commercial license to sell the printed versions. Could you let me know if that’s possible?

@user_2261848140

Perfeito

@user_3214626570

Boosted

Nice and simple model. Work even changing X-Y scale

@user_3214626570

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

This is a very nice model. I shrinked the x-y axis to fit my own purpose.

@criss623

Print Profile

0.16mm layer, 2 walls, 15% infill

thanks, prints well

@houddy

worked the holes could be a little smaller

Show original

@Lohojo

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Wall Hook with one Mount

PrintManufaktur

22.4 k

8.3 k

IKEA Skadis Wall Mount

AU3D

32 k

9.9 k

Guitar Wall Mount

VICLER

22.4 k

5.9 k

EU Wall Socket Frame with Cover in multiple sizes

Skyhopper

372

668